Interesting problem with my W2 this morning. Was on 75 for a net at about 500 watts into (at first) a Windom and then a sloper. I have the 2KW 1.8-54 Mhz sensor. The 2KW range on the meter stopped working - acted as if I was in the 200W range. The other ranges also seemed shifted down with the 200W range acting like the 20W range. Also the meter would not turn off. Pushing the on/off button caused it to recycle but it stayed on. Very strange. I tried reinstalling the firmware with no success. Finally I unplugged the power cord, waited a minute, and plugged it back in. That did it - all is fine now. Could be RF from the Windom - mine tends to send RF back down the coax even with an RF choke in line. Anyone else had this happen?
73 Bill NZ0T -- View this message in context: http://n2.nabble.com/Weird-W2-problem-tp4156475p4156475.html Sent from the Elecraft mailing list archive at Nabble.com. ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
