I have a brand new K3 that I just completed this past week (with a little help from the reflector, thank you!).
Now I am having a problem with the 8 pin mic connector on the front, neither the Hand Mic nor the pro-set work with it (using the Elecraft supplied adaptor). I was able to connect the mic from the headset to the rear of the K3 and confirm that I can in fact transmit voice. I have MIC SEL set to FP.H (I've also tried FP.L) and MIC+LIN ON. Is there another setting that I am missing to enable the Hand Mic on the front of the unit? The PTT does work on the FP Mic input as I was able to use the Hand Mic to key and transmit CW and SSB with the headset connected to the back. Thank you, Rob KC2VMP ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
