Rob, Turn BIAS on - both those mics need it, and there will be no output without the boas voltage.
73, Don W3FPR Rob Gault wrote: > I have a brand new K3 that I just completed this past week (with a > little help from the reflector, thank you!). > > Now I am having a problem with the 8 pin mic connector on the front, > neither the Hand Mic nor the pro-set work with it (using the Elecraft > supplied adaptor). I was able to connect the mic from the headset to > the rear of the K3 and confirm that I can in fact transmit voice. I > have MIC SEL set to FP.H (I've also tried FP.L) and MIC+LIN ON. Is > there another setting that I am missing to enable the Hand Mic on the > front of the unit? > > The PTT does work on the FP Mic input as I was able to use the Hand > Mic to key and transmit CW and SSB with the headset connected to the > back. > > Thank you, > > Rob > KC2VMP > > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > ------------------------------------------------------------------------ > > > No virus found in this incoming message. > Checked by AVG - www.avg.com > Version: 9.0.716 / Virus Database: 270.14.105/2562 - Release Date: 12/13/09 > 02:39:00 > > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
