My objective is to use all of this equipment simultaneously providing there is a way for all devices to receive the necessary data needed for operation. I'm interested in having the SteppIR vertical and a wire antenna fed with 450 Ohm ladder line available at all times on the same or different bands. Is it conceivable for the vertical and the AT-AUTO to pick up frequency/band data independently from each RX (main and sub)? I'm also concerned about data port availability as the MK-2 connects to the K-3's RS 232 and ACC ports. How will the other devices get data? The SteppIR box has a "data out" port that my prove useful in this scenario.
My K-3 was ordered on Monday (replacing Icom 756 PRO III) and I have the rest of the equipment listed above in place. I'm trying to work through the theory of operation with a K-3 in the mix. One major difference is that the Palstar is set up to "handshake" with Icom radios using the external tuner port on the radio. The K-3 will require a different approach, however. If you're using a similar configuration, I'd love to hear from you. Any thoughts/suggestions? 73 Tim W8JJ -- View this message in context: http://n2.nabble.com/K3-Palstar-AT-AUTO-SteppIR-Vertical-MicroKeyer-2-tp4209009p4209009.html Sent from the Elecraft mailing list archive at Nabble.com. ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
