Hmmm. I think the software "feature" you want is already in the K3. Use, the CW mode, adjust the keyer to 30 WPM or so, and you have a 50% duty cycle pulser - just hold down the "dot" paddle. If you want a lower duty cycle, simply tweak the "weight" option until you get what you want. If you have a monitor scope, or a general purpose scope that covers up to 30 MHz or so, you can use it to measure the on-off ratio.
- Jim, KL7CC Richard Thorpe wrote: > There is a company out there that makes a little devise for tuning tube HF > amplifier finals. It uses a single pulsed tone at a 30% on 70% off > duty-cycle, one can see the advantage of this device in tuning up those > expensive tubes. Could such an arrangement be incorporated in the software > of the K3? what a handy feature to have for those of us that cannot live with > just a 100 watts. Happy New Year to all. > > R Thorpe KD6LAZ > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > > > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html