Don, I thought one could listed to audio from the mic using a front panel switch. It has been a few years since I did this. I need to do it again so before I try it again on a new mic, what is it that one is monitoring when using the function?
73, Bill K9YEQ -----Original Message----- From: elecraft-boun...@mailman.qth.net [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Don Wilhelm Sent: Tuesday, January 19, 2010 12:14 PM To: n0jrn Cc: Elecraft Subject: Re: [Elecraft] Heil HC-5 & K2 Jerry, The K2 has no provisions for monitoring the transmitted audio. A separate receiver works well. I keep one at the workbench specificall so I can check the transmitted SSB signal after I align the filters on a K2 - that is about the only use my Yaesu FT-900 sees anymore. 73, Don W3FPR n0jrn wrote: > Along this line ! > > Does the K2 have a monitor circuit built in or does one need a separate > receiver to check clarity ??? > > I find no reference to monitoring the transmitting voice in the K2 manual > but wanted ask anyway. > > 72 Jerry N0JRN > > > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
