Works great for SSB on my K3... I replaced my 1.8K filters in my setups with 1.5K filters and find them to be very nice for SSB use.
I have a hard time faulting the filter in any way... I was able to see what 1.5K would be like using the DSP in the k3 and then bought the filters to protect things at that level... I found that I often ran my 1.8K filters at 1.6 or 1.7K and found that the 1.8K filter sounded like it should be engaged at around 1.9K this is what made me think the 1.5K filter would be fun to have. ~Brett On Thu, 2010-01-28 at 18:53 -0700, Bob Stonesifer wrote: > so the filter must be pretty good, or at > least popular. > > I have read nothing but good about this filter, though it seems to be > a > bit narrow for SSB, or that is what history tells me. > > Any bad on this filter? > > I would actually like to put one in the K3 and also the Mark-V, as > they > share a common IF frequency ( 8125 kHz ). > > Not looking for Hi-FI, just the best blocking that will still give an > intelligible SSB signal. ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
