I've done lots and lots of C for the 18F PIC series. The MPLAB IDE that PIC sells works well with the ICD3 programmer / debugger.
I think the K3 MCU firmware is in C and probably some ASM, but not sure on the DSP. 73, matt W6NIA On Sun, 07 Feb 2010 14:09:11 -0500, you wrote: >This is a little off topic as it is not something that might be of great >interest to some owners of Elecraft equipment unless they are into software >as I am. This reflector seems to be pretty knowledgeable and much more >technical than most, so I am posting this to the reflector as there might be >a few others here that would find it of interest. > >Recently I have started learning how to program PIC controllers, partly >because I am interested and curious about how it is done and partly because >I would like to start building some of my own software controlled radio >electronics. I am wondering what language Elecraft uses for programming >their radios and what software package they use. I am leaning towards using >C in my projects using the Microchip compilers, but I have also looked into >the Swordfish basic compiler and the mickoBasic Pro compiler as I know >Visual Basic.net very well. > >I would also be interested in knowing if there are others on the list that >have done some PIC programming and what language and software they use or >would recommend. > >Ken Nicely KE3C >______________________________________________________________ >Elecraft mailing list >Home: http://mailman.qth.net/mailman/listinfo/elecraft >Help: http://mailman.qth.net/mmfaq.htm >Post: mailto:[email protected] > >This list hosted by: http://www.qsl.net >Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
