LS, I don't understand your confusion - the lead numbers are clearly silkscreened on the board, just match them up. If the silkscreen on your board is sub-standard, refer to the parts placement diagram at the back of the manual or the board images available at Tom Hammond's website www.n0ss.net.
For 'beauty', orient it with the yellow side up. 73, Don W3FPR lstavenhagen wrote: > Hi Don, > > Ok, thanks. > So which way should it go in? I.e. should leads 1 and 3 be where the last > winding of the 4-turn (lead 3) be the side where it's between turns 6 and 7 > of the 16 turn coil or the side where it's between 7 and 8 (and the inverse > for leads 2 and 4)? It's different depending on how I have the xformer > flipped. Also, why isn't this specified? > Looks like most of the rest of the transformers have this situation and I > don't see the orientation specified for those either. > > Thanks, > LS > > ------------------------------------------------------------------------ > > > No virus found in this incoming message. > Checked by AVG - www.avg.com > Version: 9.0.733 / Virus Database: 271.1.1/2673 - Release Date: 02/07/10 > 02:22:00 > > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
