Hi group, This weekend I've for the first time tried out N1MM SO2V with my K3 with sub-receiver, in the ARRL DX contest CW. The combination works great. There is one peculiar thing, though.
When RX focus is on one VFO and TX focus is on the other, and I press a Fn key, N1MM will move TX focus to the VFO where the RX focus is. This does work, but the timing is awkward: - I see that N1MM switches TX focus (the red dot moves from the one entry window to the other, and on the K3 I see the SPLIT symbol turn on or off [depending on whether the TX focus moves to VFO B or VFO A]) - Then nothing happens for about 1.5 seconds - Then N1MM sends the message stored in the Fn key that I pressed What's causing the 1.5 seconds time delay? Any pointers? 73, Frank PA4N P.S. When I manually move the TX focus to the VFO having RX focus (using Alt-Left arrow or Alt-Right arrow) followed immediately by an Fn key, transmission starts immediately. (And yes, the radio is ready for transmit: I've many times switched TX focus manually using this method, followed by F4 (=PA4N), and each time the other station got my call okay; if the radio wouldn't have been ready, I'd except the other stations mistaking for e.g. GA4N). ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
