Question: If you don't normally use Dual Passband while in RTTY Mode, then is it true that you need to be careful where the "SHIFT" control is set? I am new to RTTY and in last weekends NA-RTTY Test I was NOT using Dual Passband, and I was often off-frequency when changing bands as my SHIFT setting was often different for each band. I believe if I had been using "Dual Passband" that I would have been on frequency as that disables the SHIFT control. Question: if your not using DUAL PASSBAND then what is the proper setting for SHIFT? Perhaps centering the SHIFT in the middle of the K-3's on screen display? Or is it true that if NET is On in MMTTY then it will put the transmitter on the receiver frequency even if SHIFT is not centered? Thanks for your thoughts! 73, Dick- K9OM Normally I dont need the DPB. But when in RUN-CQ mode with QRM in the last NAQP I was very happy to have it.
73 Claude Du Berger VE2FK [email protected]_ (mailto:[email protected]) ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
