Don Thanks for the clarification. I hadn't realised the sub tracked the main rx "invisibly" as it were - I was expecting VFO B to change, but now it's clear. Great! Graham
----- Original Message ----- From: "Don Wilhelm" <[email protected]> To: "Graham Kimbell (G3TCT)" <[email protected]> Cc: "Elecraft reflector" <[email protected]> Sent: Wednesday, March 10, 2010 11:22 PM Subject: Re: [Elecraft] K3 Diversity and mode changes > Graham, > > When in diversity receive, VFO A is the VFO for *both* the main and the > sub. While in diversity, VFO B only serves as the transmit VFO if SPLIT > is active. Tapping A>B is really a "no-op" step in diversity (unless > SPLIT is on and you want to move the TX frequency to the RX frequency. > See page 37 of the K3 manual. > > 73, > Don W3FPR > > Graham Kimbell (G3TCT) wrote: > > I'm playing with diversity operation and find that when I change modes say from usb to cw, the main rx changes frequency slightly to keep the received tone the same (as expected), but the sub rx doesn't change frequency. > > This is not a big deal because I can tap A->B to force the frequencies equal, but does anyone know if this is usual or if I have something set wrong? > > > > f/w 3.77 > > > > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
