One of the Macros used as an example in the Programmers Reference does that for Up 2 :
SWT13;SWT13;FT1;UPB5;RT0;XT0; You can modify that for Up 1: SWT13;SWT13;FT1;UPB4;RT0;XT0; I have them programmed on my PF1 and PF2 keys and use them all the time. Rick K6LE On 3/21/2010, at 10:48 , [email protected] wrote: > I've been searching the archives and can't find any quick and easy way to > "UP 1" for Quick Split operation. > The only way I see doing it is hitting the A>B button, then hitting SPLIT, > and dialing in the frequency 1 khz above the VFO A frequency into VFO B > using the VFO B knob. Is there any easier way? > My Icom 756 ProIII has a way to go "UP 1" by holding the SPLIT button and > then hitting "1" and hitting SPLIT again. Or hitting "2" to go up "2", etc. > Maybe this is something that can be added in a future firmware release? > Any info would be appreciated. > Thanks. > > Mike AC6JA > K3 #3215 > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
