> If there is a lot of difference, can I change the wetup in > the Rig to match the element?
The HC-4 has less low end and a more peaked response. In general, setting the K3 for rP.H or fP.H (high gain) and turning off the bias should be all you need to do for the HC-4. If the HC-4 is lacking in low end for your taste, you can use the TX EQ to bring up the 200 Hz setting by 6 dB (band 3 = +6dB). You should not need any other changes (leave band 1 and band 2 turned down as the 50 Hz and 100 Hz spectrum adds nothing to SSB communication). 73, ... Joe, W4TV > -----Original Message----- > From: [email protected] > [mailto:[email protected]] On Behalf Of Craig WØLV > Sent: Sunday, March 21, 2010 9:18 PM > To: [email protected] > Subject: [Elecraft] OT? Heil Headset > > > > I have an older proset with an HC-4 element. What is the > difference between the one that Elecraft offers and what I have? > > If there is a lot of difference, can I change the wetup in > the Rig to match the element? > > Craig > WØLV > -- ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
