My K3 (#474) seems to be all over the board when it comes to changing bands and ending up with the expected or desired mode for that frequency. I can be on 14.030 CW, go to 10 meters SSB and then back to 14.030 and the mode will be USB or LSB there. There seems to be no rhyme nor reason to the mode it ends up on. My old FT-1000MP always went back to the last mode used in the sub-band. It would always go to the right band, freq and mode when I'd click spots on my loggers spotting list. I've shut off mode control on my logging program (N3FJP ACLog) as I thought it may be sending conflicting Mode commands to the rig. No fix.
I can't seem find a solution in my manual (v. D-2) but seem to remember reading here that a solid fix for "mode by frequency" or "mode by last used on a band" had been implemented. If so, I obviously missed it. Is this related to the missing "band stack" in the K3? Running 3.79 . Can anyone help me get this set up properly once and for all? Thanks. 73, Terry, W0FM ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
