What logging software are you using?
-----Original Message----- >From: Terry Schieler <[email protected]> >Sent: Mar 22, 2010 2:25 PM >To: [email protected] >Subject: [Elecraft] (K3) Mode change with band unpredictible > >My K3 (#474) seems to be all over the board when it comes to changing bands >and ending up with the expected or desired mode for that frequency. I can >be on 14.030 CW, go to 10 meters SSB and then back to 14.030 and the mode >will be USB or LSB there. There seems to be no rhyme nor reason to the mode >it ends up on. My old FT-1000MP always went back to the last mode used in >the sub-band. It would always go to the right band, freq and mode when I'd >click spots on my loggers spotting list. I've shut off mode control on my >logging program (N3FJP ACLog) as I thought it may be sending conflicting >Mode commands to the rig. No fix. > > > >I can't seem find a solution in my manual (v. D-2) but seem to remember >reading here that a solid fix for "mode by frequency" or "mode by last used >on a band" had been implemented. If so, I obviously missed it. Is this >related to the missing "band stack" in the K3? > > > >Running 3.79 . Can anyone help me get this set up properly once and for >all? Thanks. > > > >73, Terry, W0FM > > > >______________________________________________________________ >Elecraft mailing list >Home: http://mailman.qth.net/mailman/listinfo/elecraft >Help: http://mailman.qth.net/mmfaq.htm >Post: mailto:[email protected] > >This list hosted by: http://www.qsl.net >Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
