Paul -
Yes, the K2 and the 100-watt amplifier / KAT100 tuner can be used in the way you describe. Order the version of the KAT-100 that is intended to be used this way. The correct model number is KAT100-2. You will need the following items as well: (1), an EC-2 enclosure (2) a tilt-bail ETS2 (so you can tilt the amp/tuner up at the same angle as the K2) - although I preferred less tilt and ordered 2 each ETS15 tilt stands, one for the amp, one to replace the one on the K2. You will want to make up a cable for use between the K2 and the amplifier, a cable with 3 "ends". One end plugs into the K2, one into the amplifier, and one hangs loose as the connecting point for external accessories such as a computer for digital modes. There are several ways to complete the assembly. I chose to leave the basic K2 pretty much alone, so it could be operated as a 10-watt portable rig. I did not install the speaker or shield that came with the amp, preferring to leave the speaker in the K2. This also meant that I didn't need to install speaker wiring inside the amplifier/tuner, and saved one interconnecting cable. You may want to do things differently. When assembling the amp and tuner in the EC2, the tuner bottom plate becomes the bottom cover of the enclosure, and the amplifier heatsink becomes the top cover. In my setup, the K2, KSB2, K60RX, KNB2, KDSP2, KBT2, KAT2, and KIO2, and speaker reside in the basic K2 box, and the KAT100-2 and the KPA100 (without the speaker) fit in the other box (the EC-2 enclosure). If you have any questions during the assembly, somebody on this reflector can help you. If not myself, then one of the other people that hang out here will be available. - Jim, KL7CC paulb wrote: > Hello folks > > Need a bit of input here....I have a K2 with auto tuner fitted. > > I would like to add the 100watt amp and external tuner. > Can these be put together in one single unit, using an Elecraft > box ? > > Not sure how the amplifier is linked to the K2, normally it has > a harness internally. > > The plan is to keep the K2 stock 10 watt for portable, and > plug in the external amp and tuner for use at home or contests. > > thanks > > cheers > Paul > zl1ajy > > > > > > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
