Hi Monty, That sounds like a lot to remember but you obviously can. I also have my 6M antenna on port 2 also but it does not have to be that way. I can monitor 6M with anther rig.
I have purchased and assembled the Elecraft KRC2 band decoder and use it with a 10 port remote switch. The switch is not all that remote. It'is here in the shack but it is a great setup because I never have to worry about transmitting into the wrong antenna. Most radio manufacturers provide band data on the back of the rig in some form or other so this can be accomplished. For me it is a huge benefit. As a matter of fact it works so well I stopped thinking about antennas a whole lot during a contest. Most of my antennas do not require a tuner in the CW part of the band where I usually reside but I use it anyway just so I don't have to worry about what part of the band I am in. This all good as long as I stay on low power and don't manually switch in a special antenna such as NVIS or a loop. I have to think about putting the NVIS antenna on port 2. I need to be able to transmit on this antenna on more than one band. That will solve a portion of my problem. -Robby -- View this message in context: http://n2.nabble.com/KAT3-Automatic-Antenna-Tuner-tp4790259p4791710.html Sent from the [K3] mailing list archive at Nabble.com. ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
