"That sounds like a useful suggestion. At least it did unitil I thought about it a while.
Connecting the input of the amp to port 2 is easy but what do I do with the output. Antenna port 1 is already connected to my antenna switchs. What do I do with the output from the amp? I could maybe connect both ports 1 and 2 to the amp input and the amp output to the switch since only one at a time is active but what happens when the port in use is sending 100W back into the unused port? That scares me a little." I use a MFJ-4726 6x6 switch. My K3 A antenna output connects directly to one of the MFJ-4726 inputs. My K3 B antenna output goes to my ALS-600 amplifier, my MFJ-998 autotuner, and a separate MFJ-4726 input. So I use the MFJ-4726 to select between barefoot or amplifier inputs, and direct the output to one of three antennas or a dummy load. Phil - AD5X ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
