You will also need a 2.7 or 2.8 kHz filter for SSB TX. The 6 kHz filter is for AM. The 500 Hz filter is a good choice for CW and Data.
The ATU is a very slick and well-integrated device. It memorizes L/C settings for each band, in many segments (see manual). I added the ATU later, but in retrospect I should have added it first. Good Luck & 73, matt W6NIA K3 #24 On Fri, 26 Mar 2010 10:16:16 -0700 (PDT), you wrote: >I am upgrading the shack from a K2 to K3. I have a nice Palstar tuner and an >ACOM amp. I am mostly a SSB guy, not big on contests or FM. Given these >resources and needs my planned configuration for the new K3 is: >K3/100 KXV3A IF Out and RX Ant. General coverage RX bandpass KDVR3-DVR KUSB >500 Hz 5pole CW filter and 6kHz AM/ESSB 8 pole filter. Thoughts? Am I unwise >for not including the internal ATU even though I have the Palstar? Thanks and >73 Dave >______________________________________________________________ >Elecraft mailing list >Home: http://mailman.qth.net/mailman/listinfo/elecraft >Help: http://mailman.qth.net/mmfaq.htm >Post: mailto:[email protected] > >This list hosted by: http://www.qsl.net >Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
