I have my K3 and SteppIR controller talking perfectly thru the computer logging program and "Y" cable using a Prolific USB to Serial converter cable.
I purchased an "Edgeport 8" USB to Serial converter and removed all the Prolific cables to existing devices and connected all directly to the Edgeport. All three devices work perfectly. However the K3 no longer responds to computer control. It's not recognized by the software. I discovered that the K3 is recognized and controlled by the software (both DX4win and N1MM) when I remove the "Y" cable connection to the SteppIR. If I reconnect the SteppIR controller then the K3 is no longer controlled by software. If I go back to the Prolific USB to Serial cable all works well again. Anyone know or care to guess why the K3 to SteppIR combination won't work thru the Edgeport 8 port adapter or any other of its 7 other ports? 73, Bud W3LL [email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
