I agree with Chen on all points. For information's sake, I can tell you I am running a K3/100 with a SignaLink-USB. Before that, I ran a K2 with a SignaLink-USB. This is a very hands-free configuration, and I have never had the slightest trouble with it. It is a lot less trouble than, say, a Flex box, with its need for a good IEEE1394 card/port. (I also ran one of these for about a year, and every once in a while it would require serious attention.)
The IMIC Chen mentions is quite a bit less expensive (~$30) but doesn't seem to allow as much control. If your demo is using a laptop and a utility like DigiPan, the IMIC could make a very portable and non-intimidating impression. John Ragle -- W1ZI ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
