All, One would assume ( there's that word again) it would be jumpered for 120/240VAC as Elecraft sell worldwide.
I would also think it will be built around MRF-150 FET's? IMD numbers should be good also. Gary VK4FD On Sat, Apr 17, 2010 at 6:40 AM, Don Wilhelm <[email protected]> wrote: > David, > > Because not all have hamshacks that are wired for 220 volts. If the > space was not wired specifically for hamshack use, there is likely to be > only 120 volt receptacles available. Up to 1000 watts draw (500 watts > with 50% efficiency) on a normal 120 volt 15 amp circuit is practical, > but attempting to run more than becomes marginal. > > 73, > Don W3FPR > > David Ferrington, M0XDF wrote: > > I'm intrigued, obviously we'd look for 220v over here, but why not 120v > in US? > > 73 de M0XDF, K3 #174 > > > > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > -- Gary VK4FD - Motorhome Mobile http://www.qsl.net/vk4fd/ K3 #679 For everything else there's Mastercard!!! ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
