I am using a Heil Proset, IC element, Mic gain to LO, setting 35 and compression set at 20. With this I can not talk the CMP reading above 10 or the ALC reading above 7. I get good audio reports and just as importantly I get heard remarkably well by DX stations.
AB2TC - Knut Jim Brown-10 wrote: > > On Mon, 26 Apr 2010 11:56:50 -0700 (PDT), ab2tc wrote: > >>On the K3 what would be the approximate setting for 10dB compression? > > Follow instructions in the K3 manual to set the meter to read > compression. Then follow the instructions in the manual for first > setting the mic gain without any compression, and then set the > compression with the compression control. When you talk, you'll see the > compression bouncing around as you talk. It will start sounding bad when > it goes above 10dB on the hottest voice peaks. > > 73, > > Jim Brown K9YC > > <snip> > -- View this message in context: http://elecraft.365791.n2.nabble.com/W2IHY-8-band-equalizer-and-EQ-Plus-tp4959845p4965456.html Sent from the [K3] mailing list archive at Nabble.com. ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
