Don Wilhelm-4 wrote: > > It is easier to move all 4 bands upward. Just spread the turns on L1 to > obtain the low frequency end point that you want. > You will likely loose 30 meter coverage unless you change the crystal to > the one normally used for the 150 kHz VFO range. >
This is what I did. The VFO range on my K1 is roughly 102 khz, and moving L1 to a wider spacing, I ended up with: 40 : 7014 - 7117 30 : 10109 - 10212 20 : 14008 - 14111 15 : 21009 - 21112 So, as a general, I need to be careful at the low end of 40, 20, 15 and the upper end of 30. So, not quite what you were asking for, but I hope it helps anyway. 73, Byron KI6NUL -- View this message in context: http://elecraft.365791.n2.nabble.com/K1-Moving-the-range-of-40-meters-from-7-100-up-to-7-125-tp4987271p4987798.html Sent from the [K1] mailing list archive at Nabble.com. ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
