Glenn, Can you do the Transmit Gain Calibration manually (from the menu - see the K3 manual)? Try it - it must be done on each band, and should be done forst at the 5 watt level and then the 50 watt level. Which bands succeed and which bands fail?
73, Don W3FPR Glenn Haffly wrote: > I have K3 serial number 2802 with the 100 watt option. All was well until > today. > Currently there is zero to minimal output. > Rotating the power knob to 12 watts you hear the relay. Regardless of power > setting > only 1 bar on the RF is lit.The fans are workings. > Rechecking the TX calibration it failed at 5 watts with the ERR TXG message > on the display. > > Where do I start? > Glenn , K5ZE > > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
