One would think that.. However, that was the first thing I checked.. Not short in plug or cable..Weird..!!
On 5/17/2010 5:41 PM, Don Wilhelm wrote: > That behavior indicates that the dot and dash contacts are connected > together somewhere. It could be at the paddle, in the cable, or at > the plug. > You can confirm that by checking continuity between the tip and ring > of the stereo plug - they should show infinite resistance, but in your > case I think you will find it to be close to zero ohms. > > 73, > Don W3FPR > > W4CCS wrote: >> Purchased a new Vibroplex at Dayton and having some difficulty >> getting it going. I have been using a keyboard for several years and >> wanted to maintain my sending skills (as much as they are). >> >> With the plug inserted in the "paddle" input, All I get is a dot dash >> dot dash no matter which paddle I push. I cannot see anything in the >> config menu that addresses this problem. >> >> Any ideas..?? >> >> de W4CCS >> ______________________________________________________________ >> Elecraft mailing list >> Home: http://mailman.qth.net/mailman/listinfo/elecraft >> Help: http://mailman.qth.net/mmfaq.htm >> Post: mailto:[email protected] >> >> This list hosted by: http://www.qsl.net >> Please help support this email list: http://www.qsl.net/donate.html >> ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
