Hi Pete, Thank you for your quick reply. I my case, no problem if SubRcvr is muted during Main Transmit; most of time, i'm in RX with JT65A.
My best 73, Rudolf, HB9ARI Pete Smith wrote: > I thought that the sub-RX was muted any time that the transmitter is > active - not so? > > 73, Pete N4ZR > > The World Contest Station Database, updated daily at www.conteststations.com > The Reverse Beacon Network at http://reversebeacon.net, blog at > reversebeacon.blogspot.com > > > On 5/25/2010 8:35 AM, Bill VanAlstyne W5WVO wrote: > >> Hi Rudolph, >> >> I am someone who also works 20m JT65A on 14076 and 6 meters, mostly FSK441 >> meteor scatter and of course SSB/CW sporadic-E when it's happening -- and if >> I had a KRX3 second receiver, that's exactly how I would use mine. As far as >> I know, that configuration is quite possible. I do also have a DCI 8-pole 6m >> bandpass filter inline with my PR6 preamp, which would be protected thereby >> from the HF transmit signal field. I don't know if the filter is strictly >> necessary while using the K3 to transmit at basically QRP levels of<75W. >> But with the DCI filter, it should be no problem for the 6m receive chain. >> >> I'm not going to be in a position any time soon to get the KRX3, but when I >> do, that's how I will be using it mostly. I'm looking forward to hearing >> confirmation from others that this configuration will work. >> >> Bill W5WVO >> >> PS -- Will be looking for you on 14076 JT65A -- need your country on that >> mode/band. >> >> -------------------------------------------------- >> From: "hb9ari"<[email protected]> >> Sent: Tuesday, May 25, 2010 3:52 AM >> To: "Elecraft-forum"<[email protected]> >> Subject: [Elecraft] K3 Sub-receiver use >> >> >> >>> Hello, >>> >>> Before to order a sub-receiver for my K3 (#1212), >>> i would know if the primary use i've envisaged is possible: >>> >>> RX/TX on main receiver on 20m for example, with >>> output power between 5 and 75W (JT65A mainly). >>> Sometimes, the auto-tuner in the K3 is used. >>> >>> RX on sub-receiver for 6m on a separated antenna, >>> (Preampli 6m Elecraft ON or OFF) and IF output to >>> the (ordered ) P3 for band monitoring. >>> >>> Thank you for information, because i'm not >>> clear with hardware and firmware version >>> necessary for this "dual" band use. >>> >>> My best 73, >>> Rudolf, HB9ARI >>> >>> >>> >>> ______________________________________________________________ >>> Elecraft mailing list >>> Home: http://mailman.qth.net/mailman/listinfo/elecraft >>> Help: http://mailman.qth.net/mmfaq.htm >>> Post: mailto:[email protected] >>> >>> This list hosted by: http://www.qsl.net >>> Please help support this email list: http://www.qsl.net/donate.html >>> >>> >>> >>> >> ______________________________________________________________ >> Elecraft mailing list >> Home: http://mailman.qth.net/mailman/listinfo/elecraft >> Help: http://mailman.qth.net/mmfaq.htm >> Post: mailto:[email protected] >> >> This list hosted by: http://www.qsl.net >> Please help support this email list: http://www.qsl.net/donate.html >> >> >> >> > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
