Hi Don, Your ideas and information got me there. I checked K15 to make sure I understood the relay table and it happened to be in the wrong position.
73, Phil W6TQG On Thu, Jun 3, 2010 at 11:24 PM, Don Wilhelm <[email protected]> wrote: > Phil, > > Good sleuthing. Given the information I had, I would not have suspected > K15, but then what do I know!, you measurements are better than my ideas. > > > 73, > Don W3FPR > > Phil-W6TQG wrote: > >> Hi Don, >> >> Thank you for your help and information! K15 was the offender - when >> hot, pins 3 to 4 and also 7 to 8 stay connected after changing the band >> from 20m down to 40 or 80. This cuts off the path through K14 and K13 to >> C71 and C72. >> >> 73, >> Phil W6TQG >> >> >> > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
