Roger, That is "the way it is" - at least for the time being. The Low Power amplifier is limited to 8 watts on 6 meters, as I recall because of IMD performance. Wayne has said he will do something to allow the KPA3 to begin above 8 watts on 6 meters, but I have no idea about the schedule for that change.
73, Don W3FPR Roger Dixon wrote: > On all other bands, increasing the power level goes in 0.1W steps up 12watts > and then in one watt steps above this. > > I'm sure this used to happen on 50MHz as well. However, now the power > increases in 0.1W steps to 8 watts and then jumps to 13W before increasing > in 1W steps. So I can't set an output level between 8 and 13 watts, which > is just what I need for the amplifier!!!! > > Any ideas as to what I can have done to achieve this "feature" ? > > TIA > Roger - G4BVY > > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
