FWIW, my KIO3 inputs are snug with no movement. Check the assembly as Don suggested; something doesn't sound right if you're experiencing significant lateral movement.
Vy 73 de James K2QI > > > > NZ8J wrote: > > Hi, > > > > I just purchased an K3 from another ham and noticed when I was hooking > > things up that the KIO3 I/O module seems to be very loose. ( the plug-in > > jacks move up and down quite a bit and are very loose). > > Is this a normal condition? There doesn't appear to be any support for > > this module other than the friction fit of the pins plugging into the > > KIO3 mother board. I haven't noticed any abnormal operation, I was just > > curious if this is normal after the K3 has been used a while, (this one > > is about 18 months old) or something that I should look into further. > > > > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
