So I have a K2 all put together. I thought it was receiving fine - I didn't try transmitting as I shamefully don't have CW down yet. I got the ssb kit and put it together and it didn't transmit. I stripped it out (jumpers back in place at W2, W3 and C167 is back in) and tried testing cw transmit and found a problem, but didn't fix it. So now I'm testing the voltages and finding some odd numbers. Perhaps they've been seen before:
Q18 S is giving 4.9V instead of the suggested 2-3V Q18 D is giving 8V instead of 6.3 U1 pin9 and 10 give 0V U4 pin3 gives 2.4V instead of 0 U4 pin7 gives 5V instead of 0 U4 pin13 gives 0V instead of 4 U4 pin15 gives 2.5V instead of 5 U5 pin1 is 5 instead of 0 U5 pin2 is 0 instead of 5 U5 pin4 is 0 instead of 5 Suggestions on where to start? Thanks K6RJG ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html