The first KSYN3 stability change affects R10 with its value moving from 82K to 56K. In the second change, R20 is changed to 25-ohms. In both cases, a new resistor can be bridged across the older resistor to establish the new component value.
Paul, W9AC ----- Original Message ----- From: "Alexandr Kobranov" <[email protected]> To: "Bill W4ZV" <[email protected]> Cc: <[email protected]> Sent: Wednesday, June 23, 2010 1:49 PM Subject: Re: [Elecraft] K3SYN3 with and without stiffener (was: shielding) I am not sure - aren´t there 2 modifications of KSYN3 module - one for avoiding PLL problems in higher temperature (by changing R from 89k to 50k) and the second one for curinng "chirp" problem by increasing of the gain of some transistor by replacement of some other resistor? I suppose only the first one is a part of KSYN3 stiffener u/g. ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
