Mike, Have you tried another microphone? If the rig checks out ok with another microphone, check the PTT switch in the MH2, mines a bit 'ordinary' and occasionally does not make contact when the PTT button is pressed.
Jeff Cochrane VK4BOF Innisfail QLD Australia Elecraft K3 #4257 ----- Original Message ----- From: VK1OO To: Reflector Elecraft Sent: Sunday, June 27, 2010 6:28 PM Subject: [Elecraft] Please Help - K2 Loss of SSB Transmit Hi, My K2 seems to have lost power out in SSB mode. As far as I can tell, the RX is still working OK in all modes. The inbuilt ATU seems to tune OK and there is power out in CW. When I hold the MH2 PTT in, there is no "click", but the RX goes silent, the RF/ALC display stays blank in both RF and ALC modes ie there are no bars when I speak or whistle into the mike. Any suggestions would be appreciated. Mike VK1OO K2: 2599 ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
