Hi Jeff, Thanks for this suggestion. I don't have another mike to try, but I've checked, and the PTT is working OK.
Mike VK1OO On 27/06/2010 6:42 PM, Jeff Cochrane - VK4BOF wrote: > Mike, > Have you tried another microphone? > If the rig checks out ok with another microphone, check the PTT switch > in the MH2, mines a bit 'ordinary' and occasionally does not make > contact when the PTT button is pressed. > Jeff Cochrane > VK4BOF > Innisfail QLD > Australia > Elecraft K3 #4257 > > ----- Original Message ----- > *From:* VK1OO <mailto:[email protected]> > *To:* Reflector Elecraft <mailto:[email protected]> > *Sent:* Sunday, June 27, 2010 6:28 PM > *Subject:* [Elecraft] Please Help - K2 Loss of SSB Transmit > > Hi, > > My K2 seems to have lost power out in SSB mode. As far as I can tell, > the RX is still working OK in all modes. The inbuilt ATU seems to > tune > OK and there is power out in CW. When I hold the MH2 PTT in, there > is no > "click", but the RX goes silent, the RF/ALC display stays blank in > both > RF and ALC modes ie there are no bars when I speak or whistle into > the mike. > > Any suggestions would be appreciated. > > Mike > VK1OO > K2: 2599 > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
