Lee I had an issue with the signalink were somehow the mixer settings got changed. I called the Signalink folks and they advised the VOL and the WAV settings should be set to max.
73 Greg On 6/30/2010 7:08 PM, Lee Buller wrote: > I went back through the installation of the SignaLink USB again. I increased > the drive from the computer to the device using the mixer panel program in > Windows XP. It was set as per the instructions, but I tweak it up a couple > of notches and it seems to drive a whole not better now. I get plenty of > drive to the audio where I am running 45 on LINE IN and about t2 o'clock on > the SignaLink USB. HMMMM. > > Thanks for all the help guys. > > Lee > k0WA > > > Ham Radio Operators: Kansas QSO Party is August 28-29, 2010. See > www.ksqsoparty.org for details > > In our day and age it seems that Common Sense is in short supply. If you > don't have any Common Sense - get some Common Sense and use it. If you can't > find any Common Sense, ask for help from somebody who has some Common Sense. > Is Common Sense divine? > > Common Sense is the image of the Creator expressing revealed truth in my > mind. - J. Wolf > > > > > > > ________________________________ > From: Lee Buller<[email protected]> > To: Elecraft Reflector<[email protected]> > Sent: Wed, June 30, 2010 8:02:36 PM > Subject: [Elecraft] AFSK - K3 - SignaLink USB > > > Ladies and Gentlemen.... > > I just got my K3 back from Aptos. I had some issues with the unit that were > repaired and all the mods were put into place. > > Things have changed for my AFSK setup and wonder if others are seeing this. > > I am now having to drive the SignaLink USB full TX to get any ALC indication > on the K3. In addition, my LINE level is now at 58 and it just goes to 60. > Now, I am driving the K3 with the SignaLink USB through the LINE IN jack in > the back and of course the audio is coming out of the LINE OUT. All seems to > be working (even had an RTTY contact today), but it the change has been that > I have to drive the K3 harder than I did before. Before, I used LINE OUT at > around 45 and the SignaLink was at the 2 o'clock position. > > Is this what others are seeing with the newer models of the K3? Mine was > upgraded to current production level. I have read most of the manual, but > can't seem to find an menu where it lets you set any more gain for LINE IN. > > Lee - K0WA > > > > Ham Radio Operators: Kansas QSO Party is August 28-29, 2010. See > www.ksqsoparty.org for details > > In our day and age it seems that Common Sense is in short supply. If you > don't have any Common Sense - get some Common Sense and use it. If you can't > find any Common Sense, ask for help from somebody who has some Common Sense. > Is Common Sense divine? > > Common Sense is the image of the Creator expressing revealed truth in my > mind. - J. Wolf > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
