On 7/1/2010 6:14 PM, Don Wilhelm wrote: > And there is another method that works well too and is quite safe. > Created a long time ago by Tom Hammond N0SS. > > Mount one foot, insert the bail, then using long screws (the PA mounting > screws will do, but 3/4 inch or longer 4-40 screws work easier), put the > screws in at an angle and start the nuts, don't bother with the > lockwashers - then alternately tighten the long screws and foot and the > loose end of the bail will be pulled into place as you tighten the screws. > When these long screws are both tight, remove them one at a time and > insert the proper hardware, lock washers and nuts. Job done. > > 73, > Don W3FPR > I can vouch for this method, I used it to change from the tall bail to the short one
-- GB & 73 K5OAI Sam Morgan ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
