I have a K2 with SSB, 100W PA deck, and 100W antenna tuner. I sent this in a
while ago, and ya'll got it working great. During the Rookie Roundup, it
developed a major problem. I was on SSB and splattering all over the place. I
disable the pa deck, and set the power to 1W and I'm transmitting between 20
and 30 watts, depending on the band. All bands are 20 except for 40m which is
30 watts. I've made a few measuments of resistance and voltage, but so far
everything seems fine. It receives fine, and works correctly in every other
way. I also tried it in tune mode, and with a CW key, and I get the same
results. I did purchase some coax a while back, that gave me fits for quite
some time, I finally figured out, the center pin was shorted out to the
shield. I replaced the ends, and everything was working great. I haven't used
it much between then and now, so it may be a contributing factor. Will you
recommend what I can do to narrow
down the problem?
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
