Dave, Which RigExpert do you have and how do you have it hooked to the K3. If you are connecting to LINE IN, that input requires a higher input level than the microphone input, and you will have to turn the output knob on the RigExpert almost all the way up.
73, Don W3FPR David F. Reed wrote: > Hi folks; > > I am having a problem getting digital modes going using a RigExpert with > my K3. > > I know I have everything hooked up right, as RX is fine, TX happens, but > no power out. I know the audio is coming to line in as I can hear it > with the monitor turned up all the way. > > What seems to be the problem is too low a sensitivity on the K3 input > side (MIC gain all the way up in digital mode), as the RigExpert works > fine with my TS-480 and my IC-7800; I only see this on my K3. > > Any suggestions or help would be greatly appreciated. > > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
