Don, Thanks for the suggestion, the rear mic input had the needed sensitivity; works great now.
73 de Dave, W5SV On 7/2/10 1:36 PM, Don Wilhelm wrote: > Dave, > > Which RigExpert do you have and how do you have it hooked to the K3. > If you are connecting to LINE IN, that input requires a higher input > level than the microphone input, and you will have to turn the output > knob on the RigExpert almost all the way up. > > 73, > Don W3FPR > > David F. Reed wrote: >> Hi folks; >> >> I am having a problem getting digital modes going using a RigExpert >> with my K3. >> >> I know I have everything hooked up right, as RX is fine, TX happens, >> but no power out. I know the audio is coming to line in as I can >> hear it with the monitor turned up all the way. >> >> What seems to be the problem is too low a sensitivity on the K3 input >> side (MIC gain all the way up in digital mode), as the RigExpert >> works fine with my TS-480 and my IC-7800; I only see this on my K3. >> >> Any suggestions or help would be greatly appreciated. >> ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
