Is it possible to have VOX control over transmission while in the AFSK A mode on RTTY and using the Line In jack for audio from the soundcard? I tried unsuccessfully to do this in the recent RTTY Sprint using MMTTY. I finally had to use HRD with DM780, which I assume was controlling the T/R switching via the PTT.
Here's how I've set things and troubleshooting I've done - Mode: Data; Data mode: AFSK A Soundcard out connected to Line In on rear panel. VOX is ON TX Standby is not enabled MENU: MIC SEL is selected to LINE IN MIC Gain set to a nominal non-zero value Verified that the sound card is putting out a strong AFSK signal. Also, by pressing XMIT, the K3 does transmit this signal and give the required bars of ALC indication. Should I be using the microphone input to have VOX control? I wouldn't mind using PTT control but I'm not sure N1MM with MMTTY are up to the task. HRD and DM780 aren't really contest software since no dupe checking is available. 73- Nick, WA5BDU ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
