Hello, I'm using Electric 9.04 on OS X 10.9.3 and ngspice 26 as SPICE engine.
I'm trying to correctly display a DC analysis, so the x-axis is not in the time domain. In section 4.11 of the manual [1] "eye plots" are mentioned. If I drag v-sweep or any other voltage signal onto the time axis then the axis itself changes (it looses the units) but then the signal data are not show. On a [0, 5]V sweep with 1mV step I get a 5e3 scale end, while it should be 5. Even zooming or setting the horizontal and vertical limits I don't get the plot data exepct the first 2 elements, correctly spaced by 1e-3. Can anyone confirm that eye plot works on his setup? (e.g. plotting a signal with respect to itself in order to generate a straight line) Can anyone provide an example? Thanks. [1] http://www.staticfreesoft.com/jmanual/mchap04-11.html -- Andrea P.S. I wrote a lengthy message with attached screenshots but it didn't go through, I'm not sure why. Therefore I'm keeping this text-only and short. -- You received this message because you are subscribed to the Google Groups "Electric VLSI Editor" group. To unsubscribe from this group and stop receiving emails from it, send an email to electricvlsi+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.
