Merci Guy, Donc, actuellement, il n'y a que Spectrum qui serait conforme aux normes EU , ou éventuellement modifiable (selon la provenance) , pour adhérer à cette norme EU. C'est gros quand même ! Car commercialement, les "vendeurs de modules" de par le monde, ont tout intérêt à respecter ces différentes législations. C'est pas insurmontable, ni techniquement, ni commercialement. Mon avis est qu'il doit y avoir une bonne part de "protectionnisme" dans ces différences de normes.
Hugo Vanhaverbeke ----- Original Message ----- From: Guy Revel To: [email protected] Sent: Saturday, January 17, 2009 5:06 PM Subject: [electron.libre] Re: Conformité 2,4GHz Salut Hugo, Je ne sais pas. Le mieux est de demander au distributeur ou, apparemment, au SAV européen. Les modules vendus aux US ou en Chine sont habituellement au standard US avec une puissance de 200 mW au lieu des 100 mW autorisés en Europe. C'est l'importateur (dans le pays d'arrivée et d'utilisation) qui est responsable de la conformité. It has been brought to our attention that some Spektrum DX7 transmitters and manuals sold to US retailers may have been mislabeled regarding compliance with European Union broadcast regulations. Manuals for Spektrum DX7 transmitters sold in the USA indicate that the DX7 currently meets European Union power-output standards. While units intended for sale in Europe meet EU output standards, this icon also appears in the manuals for units intended for sale in the US only. DX7 transmitters that are sold for use in the US exceed the power limits in place in the European Union. Running changes are being made to remove this icon from units and manuals that do not meet these stringent standards. To ensure you comply with broadcasting standards in your area, we are recommending you purchase your DX7 from within your specific region. If you are an EU consumer and have purchased a radio from a retailer outside the EU prior to this notice and you suspect that your DX7 does not comply with the EC specifications, please contact Horizon Hobby UK's service centre. If necessary, they will arrange for the re-programming of your radio to the correct EC specification. For further details please contact Horizon Hobby UK on [email protected] or telephone (0)1279 641097. Guy R. At 16:24 17/01/2009, you wrote: La version 2 de Corona travaille en DSSS ( la version 1 étant en FHSS ) . Sur le manuel je peux lire " Our Corona 2,4G module and receiver totally eliminates radio interference and glitches which have troubled model hobbyists for many years. The software in the transmitting module and receiver can relocate the channels dynamically. Flyers need not worry about the other planes and interference from other transmitters. The unit adheres strictly to FHSS/ DSSS communication standards. etc......" Spécifications pour le module d'émission Voltage: min 6 V Typ 10V max 13 Volts Operating Current : 100mA Résolution : 10 bit Spécification pour le récepteur: Voltage : min 4,8 V ;O( typ 5,0 V max 6 V Operating current 30 mA Specified range 1,5 Km Resolution 10 bit Latensy 22 ms Sensitivity - 100 dbm Mes modules HF et récepteurs possèdent déjà les étiquettes de marquage CE! (home made ;O))) ------------------------------------------------------------------------------ No virus found in this incoming message. Checked by AVG - http://www.avg.com Version: 8.0.176 / Virus Database: 270.10.8/1898 - Release Date: 16/01/2009 15:09
