Hello Markus,

Am Mittwoch, 11. Juli 2007 20:58 schrieb Markus Rechberger:
> can you do me a favour and post your dmesg output after attaching your
> device.

Hmm, I already did that in my first mail...

anyway, in case it fell through the cracks, here it is once more.

Good luck and thanks,
-Malte

-- dmesg --
usb 4-1: new high speed USB device using ehci_hcd and address 3
usb 4-1: configuration #1 chosen from 1 choice
Linux video capture interface: v2.00
em28xx v4l2 driver version 0.0.1 loaded
em28xx new video device (2040:4200): interface 0, class 255
em28xx: device is attached to a USB 2.0 bus
em28xx: you're using the experimental/unstable tree from mcentral.de
em28xx: there's also a stable tree available but which is limited to
em28xx: linux <=2.6.19.2
em28xx: it's fine to use this driver but keep in mind that it will move
em28xx: to http://mcentral.de/hg/~mrec/v4l-dvb-kernel as soon as it's
em28xx: proved to be stable
em28xx #0: Alternate settings: 8
em28xx #0: Alternate setting 0, max size= 0
em28xx #0: Alternate setting 1, max size= 1024
em28xx #0: Alternate setting 2, max size= 1448
em28xx #0: Alternate setting 3, max size= 2048
em28xx #0: Alternate setting 4, max size= 2304
em28xx #0: Alternate setting 5, max size= 2580
em28xx #0: Alternate setting 6, max size= 2892
em28xx #0: Alternate setting 7, max size= 3072
attach_inform: eeprom detected.
em28xx #0: i2c eeprom 00: 1a eb 67 95 40 20 00 42 20 00 1e 03 82 18 6a 18
em28xx #0: i2c eeprom 10: 00 00 24 57 6e 00 00 00 60 00 00 00 02 00 00 00
em28xx #0: i2c eeprom 20: 1e 00 10 10 00 00 00 00 00 00 00 00 00 00 00 00
em28xx #0: i2c eeprom 30: 00 00 20 40 20 80 02 20 10 01 01 01 00 00 00 00
em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 18 03 30 00 30 00
em28xx #0: i2c eeprom 70: 30 00 32 00 38 00 33 00 30 00 32 00 33 00 37 00
em28xx #0: i2c eeprom 80: 00 00 18 03 57 00 69 00 6e 00 54 00 56 00 20 00
em28xx #0: i2c eeprom 90: 55 00 53 00 42 00 32 00 00 00 00 00 00 00 00 00
em28xx #0: i2c eeprom a0: 84 12 00 00 05 50 1a 7f 74 3e 23 23 a4 92 15 8d
em28xx #0: i2c eeprom b0: ff 00 00 00 04 84 0a 00 01 01 20 77 00 40 9d 2f
em28xx #0: i2c eeprom c0: 2b 00 74 02 01 06 03 79 52 00 00 00 00 00 00 00
em28xx #0: i2c eeprom d0: 84 12 00 00 05 50 1a 7f 74 3e 23 23 a4 92 15 8d
em28xx #0: i2c eeprom e0: ff 00 00 00 04 84 0a 00 01 01 20 77 00 40 9d 2f
em28xx #0: i2c eeprom f0: 2b 00 74 02 01 06 03 79 52 00 00 00 00 00 00 00
EEPROM ID= 0x9567eb1a
Vendor/Product ID= 2040:4200
I2S audio, sample rate=32k
500mA max power
Table at 0x24, strings=0x1882, 0x186a, 0x0000
tveeprom 1-0050: Hauppauge model 42019, rev C162, serial# 2830237
tveeprom 1-0050: tuner model is LG S701D MK3 (idx 62, type 38)
tveeprom 1-0050: TV standards PAL(B/G) PAL(I) SECAM(L/L') PAL(D/D1/K) (eeprom 
0x74)
tveeprom 1-0050: audio processor is MSP3415 (idx 6)
tveeprom 1-0050: has radio
setting new tuner type now 38!
tuner 1-0043: chip found @ 0x86 (em28xx #0)
tda9887 1-0043: tda988[5/6/7] found @ 0x43 (tuner)
tuner 1-0063: chip found @ 0xc6 (em28xx #0)
attach inform (default): detected I2C address c6
tuner 0x63: Configuration acknowledged
tuner 1-0063: type set to 38 (Philips PAL/SECAM multi (FM1216ME MK3))
attach_inform: tvp5150 detected.
attach_inform: IR detected ().
input: i2c IR (EM2840 Hauppauge) as /class/input/input3
ir-kbd-i2c: i2c IR (EM2840 Hauppauge) detected at i2c-1/1-0030/ir0 [em28xx #0]
msp3400 1-0044: MSP3415G-B8 found @ 0x88 (em28xx #0)
msp3400 1-0044: MSP3415G-B8 supports nicam and radio, mode is autodetect and 
autoselect
attach_inform: msp34xx detected.
tvp5150 1-005c: tvp5150am1 detected.
em28xx #0: V4L2 device registered as /dev/video0
em28xx #0: Found Hauppauge WinTV USB 2
em28xx audio device (2040:4200): interface 1, class 1
em28xx audio device (2040:4200): interface 2, class 1
usbcore: registered new interface driver em28xx
usbcore: registered new interface driver snd-usb-audio

_______________________________________________
Em28xx mailing list
[email protected]
http://mcentral.de/mailman/listinfo/em28xx

Reply via email to