Markus Rechberger ha scritto:
On Sat, Aug 23, 2008 at 11:16 PM, Adriano Gigante <[EMAIL PROTECTED]> wrote:
On Thu, Aug 21, 2008 at 8:28 PM, Adriano Gigante <adrigiga at yahoo.it
<http://mcentral.de/mailman/listinfo/em28xx>> wrote:
/ Smart!
/>/ I did what you said and now it works. I just tried with tvtime because
I
/>/ haven't enough digital signal and I saw the TV!
/
to get audio work with it you need the tvtime version from
mcentral.de, sooner or later this will be mainstream because other
analog devices with digital audio interfaces have the same issue.
Markus
Hi markus,
Digital tv is ok
For analog tv, I have compiled tvtime (mcentral version) and also with this
version no audio! (...of course I've uninstalled fedora version of tvtime)
To compile it I have installed alsa-lib-devel.rpm.
what does arecord -l (lowercase L) show up?
I run tvtime always from user adriano.
from user adriano:
[EMAIL PROTECTED] ~]$ arecord -l
**** List of CAPTURE Hardware Devices ****
card 0: Intel [HDA Intel], device 0: AD198x Analog [AD198x Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
from root:
[EMAIL PROTECTED] ~]# arecord -l
**** List of CAPTURE Hardware Devices ****
card 0: Intel [HDA Intel], device 0: AD198x Analog [AD198x Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: Em28xx Audio [Em28xx Audio], device 0: Em28xx Audio [Empia 28xx
Capture]
Subdevices: 1/1
Subdevice #0: subdevice #0
But now I've tried from root:
[EMAIL PROTECTED] ~]# tvtime
Running tvtime 1.0.2.
Reading configuration from /etc/tvtime/tvtime.xml
Reading configuration from /root/.tvtime/tvtime.xml
trying to fall back to software scaling and X11 output
HDA Intel : AD198x Analog hw:0,0
Em28xx Audio : Empia 28xx Capture hw:1,0
opening: hw:1,0
Access type not available
Thanks
Adriano
Any ideas?
Bye
Adriano
_______________________________________________
Em28xx mailing list
[email protected]
http://mcentral.de/mailman/listinfo/em28xx
_______________________________________________
Em28xx mailing list
[email protected]
http://mcentral.de/mailman/listinfo/em28xx
