On Sat, Aug 23, 2008 at 11:54 PM, Adriano Gigante <[EMAIL PROTECTED]> wrote: > Markus Rechberger ha scritto: >> >> On Sat, Aug 23, 2008 at 11:16 PM, Adriano Gigante <[EMAIL PROTECTED]> >> wrote: >> >>>> >>>> On Thu, Aug 21, 2008 at 8:28 PM, Adriano Gigante <adrigiga at yahoo.it >>>> <http://mcentral.de/mailman/listinfo/em28xx>> wrote: >>>> >>>>> >>>>> / Smart! >>>>> >>>> >>>> />/ I did what you said and now it works. I just tried with tvtime >>>> because >>>> I >>>> />/ haven't enough digital signal and I saw the TV! >>>> / >>>> to get audio work with it you need the tvtime version from >>>> mcentral.de, sooner or later this will be mainstream because other >>>> analog devices with digital audio interfaces have the same issue. >>>> >>>> Markus >>>> >>>> >>>> >>> >>> Hi markus, >>> >>> Digital tv is ok >>> For analog tv, I have compiled tvtime (mcentral version) and also with >>> this >>> version no audio! (...of course I've uninstalled fedora version of >>> tvtime) >>> To compile it I have installed alsa-lib-devel.rpm. >>> >> >> what does arecord -l (lowercase L) show up? >> >> > > I run tvtime always from user adriano. > > from user adriano: > > [EMAIL PROTECTED] ~]$ arecord -l > **** List of CAPTURE Hardware Devices **** > card 0: Intel [HDA Intel], device 0: AD198x Analog [AD198x Analog] > Subdevices: 1/1 > Subdevice #0: subdevice #0 > > from root: > > [EMAIL PROTECTED] ~]# arecord -l > **** List of CAPTURE Hardware Devices **** > card 0: Intel [HDA Intel], device 0: AD198x Analog [AD198x Analog] > Subdevices: 1/1 > Subdevice #0: subdevice #0 > card 1: Em28xx Audio [Em28xx Audio], device 0: Em28xx Audio [Empia 28xx > Capture] > Subdevices: 1/1 > Subdevice #0: subdevice #0 > > But now I've tried from root: > > [EMAIL PROTECTED] ~]# tvtime > Running tvtime 1.0.2. > Reading configuration from /etc/tvtime/tvtime.xml > Reading configuration from /root/.tvtime/tvtime.xml > trying to fall back to software scaling and X11 output > HDA Intel : AD198x Analog hw:0,0 > Em28xx Audio : Empia 28xx Capture hw:1,0 > opening: hw:1,0 > Access type not available >
can you manually try to run mplayer: $ mplayer tv:// -tv driver=v4l2 afterwards open another shell and run $ arecord -D hw:1,0 --format=S16_LE --rate=48000 -c 2 | aplay does this work for you? Markus _______________________________________________ Em28xx mailing list [email protected] http://mcentral.de/mailman/listinfo/em28xx
