Hi, On Tue, Feb 10, 2009 at 5:36 PM, rvf16 <rv...@yahoo.gr> wrote: > Hello to all. > > I have a laptop Dell Inspiron E1505 running fedora 6 with a 2.6.22 linux.org > personally compiled kernel. > The tuner i use is a Terratec Cinergy Hybrid T USB XS FM. It has been tested > under Vista and all its features work fine. > > Under linux i installed the em28xx-new-b2e841c05e94 driver. > Analog TV and DVB-T work great. > I haven't tested VBI yet. > FM Radio doesn't work at all. > I have tried out several applications to start the fm radio. None of them > works. > Below lay the output errors : > gqradio-3f5638e1383d > #gqradio > Error talking (ioctl) to /dev/radio, Wrong address > Radio device control test failed > Error, radio support missing, or failed to init radio device! > gqradio: could not connect to socket > gqradio: No such file or directory > unable to connect to lirc daemon
wrong permissions? Markus > xawtv-3.95-4.fc6 > #radio -d -f 95.0 > tuned 95,00 MHz > VIDIOCGAUDIO: Wrong address > vlc-40d715d67a1b > #vlc radio:// :radio-frequency=100600 :radio-dev=/dev/radio0 > :radio-adev=hw:1,0 : > main input error: no suitable access module for `radio://' > > The latter is the vlc from : > http://mcentral.de/hg/~mrec/vlc > with empia support from : http://mcentral.de/hg/~mrec/empia_audio > as described in : > http://mcentral.de/wiki/index.php5/Vlc > which doesn't seem to have radio support at all even though it was > configured with this command : > ./configure --prefix=/usr --enable-v4l --enable-radio > as the output of this command even though it doesn't fail doesn't mention > anything regarding radio. > > Does anyone know what's the problem? > Thank you in advance. > Regards. > > ----------- > > Some system info relative to the tuner : > > I have compiled the em28xx-new-b2e841c05e94 driver following the procedure > below : > cd /lib/modules > rm -f -r $(uname -r) > cd /path/to/kernel/source/linux-2.6.22 > make modules_install #clean v4l tree in case a v4l-dvb had been installed > previously > ln -s /path/to/kernel/source/linux-2.6.22 /usr/src/linux # this is not > needed in fedora, just the build and source links in /lib/modules/$(uname > -r) pointing to the kernel source directory > cd /path/to/em28xx/driver/source/em28xx-new-b2e841c05e94 > ../build.sh build > ../build.sh install > ../depmod -a > reboot # this is also not needed in fedora > > This is the output of dmesg when the usb is inserted : > usb 5-5: new high speed USB device using ehci_hcd and address 3 > usb 5-5: configuration #1 chosen from 1 choice > em28xx: new video device (0ccd:0072): interface 0, class 255 > em28xx: device is attached to a USB 2.0 bus > em28xx #0: Alternate settings: 8 > em28xx #0: Alternate setting 0, max size= 0 > em28xx #0: Alternate setting 1, max size= 0 > em28xx #0: Alternate setting 2, max size= 1448 > em28xx #0: Alternate setting 3, max size= 2048 > em28xx #0: Alternate setting 4, max size= 2304 > em28xx #0: Alternate setting 5, max size= 2580 > em28xx #0: Alternate setting 6, max size= 2892 > em28xx #0: Alternate setting 7, max size= 3072 > attach_inform: eeprom detected. > em28xx #0: i2c eeprom 00: 1a eb 67 95 cd 0c 72 00 f0 12 6a 03 6a 36 a0 1a > em28xx #0: i2c eeprom 10: 00 00 24 57 46 07 09 00 60 00 00 00 02 00 00 00 > em28xx #0: i2c eeprom 20: 5e 00 12 00 f0 10 01 89 88 00 00 00 5b 1e 00 00 > em28xx #0: i2c eeprom 30: 00 00 20 40 20 6e 02 20 10 01 00 00 00 00 00 00 > em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00 d3 c4 00 00 > em28xx #0: i2c eeprom 50: a1 00 00 00 a2 80 00 00 00 00 00 00 00 00 00 00 > em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 36 03 43 00 69 00 > em28xx #0: i2c eeprom 70: 6e 00 65 00 72 00 67 00 79 00 20 00 48 00 79 00 > em28xx #0: i2c eeprom 80: 62 00 72 00 69 00 64 00 20 00 54 00 20 00 55 00 > em28xx #0: i2c eeprom 90: 53 00 42 00 20 00 58 00 53 00 20 00 46 00 4d 00 > em28xx #0: i2c eeprom a0: 1a 03 30 00 38 00 31 00 30 00 30 00 32 00 30 00 > em28xx #0: i2c eeprom b0: 30 00 34 00 37 00 37 00 39 00 00 00 00 00 31 00 > em28xx #0: i2c eeprom c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > em28xx #0: i2c eeprom d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > em28xx #0: i2c eeprom e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > em28xx #0: i2c eeprom f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > EEPROM ID= 0x9567eb1a > Vendor/Product ID= 0ccd:0072 > I2S audio, 3 sample rates > 500mA max power > Table at 0x24, strings = 0x366a, 0x1aa0, 0x0000 > cx25843.c: starting probe for adapter em28xx #0 (0x1001f) > cx25843.c: detecting cx25843 client on address 0x88 > attach_inform: msp34xx/cx25843 detected. > trying to attach xc5000 > attaching xc5000 tuner module > successfully attached tuner > radio device registered as /dev/radio0 > em28xx #0: V4L2 VBI device registered as /dev/vbi0 > em28xx #0: V4L2 device registered as /dev/video0 > em28xx-audio.c: probing for em28x1 non standard usbaudio > em28xx-audio.c: Copyright (C) 2006 Markus Rechberger > em28xx-aad: registered /dev/aad0 > em2880-dvb.c: DVB Init > DVB: registering new adapter (em2880 DVB-T). > DVB: registering frontend 0 (Zarlink ZL10353 DVB-T)... > input: em2880/em2870 remote control as /class/input/input7 > em28xx-input.c: remote control handler attached > em28xx #0: Found Terratec Hybrid XS FM (em2883) > > All relative devices are created : > Radio : > /dev/radio0 > Analog TV video : > /dev/video0 > Analog TV Audio : > /dev/dsp1 > Video In : > /dev/vbi0 > > > > _______________________________________________ > Em28xx mailing list > Em28xx@mcentral.de > http://mcentral.de/mailman/listinfo/em28xx > _______________________________________________ Em28xx mailing list Em28xx@mcentral.de http://mcentral.de/mailman/listinfo/em28xx
