Hi Jay, I misread your message the first time. I thought you had said 
that the modem was dialing, but then stalled at the connecting to network 
part. That's that the newer AOL CCL's are good for. 

Your "unable to open port" problem is a typical one, but with a number of 
possible causes. 

* is the fax software on? Disable the fax extension(s) as a test. (reboot)
* Is AppleTalk on the modem's port? As a test, try turning off AppleTalk 
& reboot. 
* Palm's Hot Sync Monitor might be hogging the port too. Disable it and 
see.
* Is the modem on & working correctly? Can anything else access it in any 
way?
* Do you have a dial tone on that phone line? Are the phone wires secure?
* Can Zterm blink the modem? 
* Does Zterm respond with an "OK" if you type a "ati4" or "atz"
  http://homepage.mac.com/dalverson/zterm/ZTerm1.0.1.sit.hqx
* What Mac model do you have
* What Mac OS?
* What brand & model of modem?

Let's start here, and go forward.
Best, 
Dave Nathanson
Mac Medix


On 7/29/02 11:30 PM, [EMAIL PROTECTED] showcased stellar typing and 
language skills in this message:

>
>I switched the modem back to the modem port (my digital camera worked better 
>on the modem port) thinking this would help. I changed all the settings to 
>match. No dice. I do have an Apple printer, but it's via Ethernet 
>(Laserwriter 16/600). I also disabled Palm HotSync (using the printer port), 
>but that had no effect. What else can this be?
>
>Regards,
>Jay

___________________________________________________________________________
To unsubscribe send a mail message with a SUBJECT line of "unsubscribe" to
<[EMAIL PROTECTED]>  or  <[EMAIL PROTECTED]>

Reply via email to