Here's what I've tried so far, and the answers to the rest (see below). I'm 
completely stumped and out of leads now. Can the TCP settings be a possible 
culprit?

Regards,
Jay

In a message dated 7/30/02 12:18:34 PM, [EMAIL PROTECTED] writes:

<< Hi Jay, I misread your message the first time. I thought you had said 
that the modem was dialing, but then stalled at the connecting to network 
part. That's that the newer AOL CCL's are good for. 

Your "unable to open port" problem is a typical one, but with a number of 
possible causes. 

* is the fax software on? Disable the fax extension(s) as a test. (reboot) 
Disabled and rebooted; no affect (Global Village control panel and 
extensions). 

* Is AppleTalk on the modem's port? As a test, try turning off AppleTalk 
& reboot. 
AppleTalk is running on Ethernet. 

* Palm's Hot Sync Monitor might be hogging the port too. Disable it and 
see.
Disabled and rebooted; no affect. Also disabled in conjunction with fax 
software. 

* Is the modem on & working correctly? Can anything else access it in any 
way?
Modem works great, no issues. 

* Do you have a dial tone on that phone line? Are the phone wires secure?
Good tone, wires okay. 

* Can Zterm blink the modem? Does Zterm respond with an "OK" if you type a 
"ati4" or "atz"
ATI4 responds with "V.90 XXX". ATZ responds with "XXX". 

* What Mac model do you have? What Mac OS? What brand & model of modem?
PowerMac 8500, Mac OS 8.6, Global Village 56K external on modem port

Let's start here, and go forward.
Best, 
Dave Nathanson
Mac Medix >>

___________________________________________________________________________
To unsubscribe send a mail message with a SUBJECT line of "unsubscribe" to
<[EMAIL PROTECTED]>  or  <[EMAIL PROTECTED]>

Reply via email to