[EMAIL PROTECTED] <[EMAIL PROTECTED]> wrote on 1/2/06 9:06 PM: > 1) How do I somehow reinstall Emailer so it is speaking to its content files > from before?
If you moved the Claris Emailer application to another location, or if you moved the files in the Claris Emailer's folder(s) to another location, you "broke" the link between the application and its files. If you moved them, put them back where they were. It's been a long time since I used Emailer prior to the current (last version) 2.0v3. So I don't recall where all the files and folders are supposed to go. > Also there is a Temporary Incoming Folder with 2.6 MB, 33 > items, which date/time from when it all froze up during a download of 100 > emails upon returning from a trip. Another idea is that there is a corrupt file(s) in those 33 items. You could try moving them out of the Temp Incoming folder, putting them back in one-by-one, and seeing if Claris Emailer will load properly. You can look at each of the files by itself by opening it with a text editor such as BB Edit or Microsoft Word. You may lose some of the formatting, but you'll see the content. You could also try rebuilding the Claris Emailer database. I'm not sure if the Emailer Lite version supports a rebuild, but 2.0v3 does. Start Emailer while holding down the Option key. You'll get a dialogue asking you if you want to do a rebuild. Tell it "yes," and wait a long time for the rebuild to go ahead. You should also consider upgrading to Claris Emailer 2.0v3. After installation, it will permit you to import your old mails and files from Emailer Lite. You should move those potentially problematic temp incoming files out of the Tem Incoming folder first, just to be sure. If you don't have 2.0v3, I can email you disk images to you so that you can install it. Email me offline if you want them. Good luck! Roger+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Roger S. Cohen, President, Cohen International [EMAIL PROTECTED] http://www.rogercohen.com Voice: +1 (845) 358-8936 Fax: +1 (845) 358-8937 ___________________________________________________________________________ To unsubscribe send a mail message with a SUBJECT line of "unsubscribe" to <[EMAIL PROTECTED]> or <[EMAIL PROTECTED]>
